Measurement is the estimation of the magnitude of some attribute of an object, such as its length or weight, relative to a unit of measuremnt. Measurement usually involves using a measuring instrument, such as a ruler or scale, which is calibrated to compare the object to some standard, such as a meter or a kilogram. In science, however, where accurate measurement is crucial, a measurement is understood to have three parts: first, the measurement itself, second, the margin of error, and third, the confidence level -- that is, the probability that the actual property of the physical object is within the margin of error. For example, we might measure the length of an object as 2.34 meters plus or minus 0.01 meter, with a 95% confidence level.
Metrology is the scientific study of measurement. In measurement theory a measurement is an observation that reduces an uncertainty expressed as a quantity. As a verb, measurement is making such observations. It includes the estimation of a physical quantity such as distance, energy, temperature, or time. It could also include such things as assessment of attitudes, values and perception in surveys or the testing of aptitudes of individuals.
In the physical sciences, measurement is most commonly thought of as the ratio of some physical quantity to a standard quantity of the same type, thus a measurement of length is the ratio of a physical length to some standard length, such as a standard meter. Measurements are usually given in terms of a real number times a unit of measurement, for example 2.53 meters, but sometimes measurements use complex numbers, as in measurements of electrical impedance.
Observations and error
The act of measuring often requires an instrument designed and calibrated for that purpose, such as a thermometer, speedometer, weighing scale, or voltmeter. Surveys and tests are also referred to as "measurement instruments" in academic testing, aptitude testing, voter polls, etc.
Measurements almost always have an error and therefore uncertainty. In fact, the reduction—not necessarily the elimination—of uncertainty is central the concept of measurement. Measurement errors are often assumed to be normally distributed about the true value of the measured quantity. Under this assumption, every measurement has three components: the estimate, the error bound, and the probability that the actual magnitude lies within the error bound of the estimate. For example, a measurement of the length of a plank might result in a measurement of 2.53 meters plus or minus 0.01 meter, with a probability of 99%.
The initial state of uncertainty, prior to any observations, is necessary to assess when using statistical methods that rely on prior knowledge (Bayesian methods,Applied Information Economics). This can be done with calibrated probability assessment.
Measurement is fundamental in science; it is one of the things that distinguishes science from pseudoscience. It is easy to come up with a theory about nature, hard to come up with a scientific theory that predicts measurements with great accuracy. Measurement is also essential in industry, commerce, engineering, construction, manufacturing, pharmaceutical production, and electronics.
- When you can measure what you are speaking about, and express it in numbers, you know something about it; but when you cannot express it in numbers, your knowledge is of a meager and unsatisfactory kind; it may be the beginning of knowledge, but you have scarcely in your thoughts advanced to the state of science. —LORD KELVIN
History of measurement
The word measurement comes from the Greek "metron", meaning limited proportion. This also has a common root with the word "moon" and "month" possibly since the moon and other astronomical objects were among the first measurement methods of time.
The history of measurements is a topic within the history of science and technology. The metre (U.S.: meter) was standardized as the unit for length after the French revolution, and has since been adopted throughout most of the world.
Laws to regulate measurement were originally developed to prevent fraud. However, units of measurement are now generally defined on a scientific basis, and are established by international treaties. In the United States, commercial measurements are regulated by the National Institute of Standards and Technology NIST, a division of the United States Department of Commerce.
Units and systems of measurement
The definition or specification of precise standards of measurement involves two key features, which are evident in the International System of Units (SI). Specifically, in this system the definition of each of the base units makes reference to specific empirical conditions and, with the exception of the kilogram, also to other quantitative attributes. Each derived SI unit is defined purely in terms of a relationship involving itself and other units; for example, the unit of velocity is 1 m/s. Due to the fact that derived units make reference to base units, the specification of empirical conditions is an implied component of the definition of all units.
Before SI units were widely adopted around the world, the British systems of English units and later Imperial units were used in Britain, the Commonwealth and the United States. The system came to be known as U.S. customary units in the United States and is still in use there and in a few Caribbean countries. These various systems of measurement have at times been called foot-pound-second systems after the Imperial units for distance, weight and time. Many Imperial units remain in use in Britain despite the fact that it has officially switched to the SI system. Road signs are still in miles, yards, miles per hour, and so on, people tend to measure their own height in feet and inches and soda is sold in pints, to give just a few examples. Imperial units are used in many other places, for example, in many Commonwealth countries which are considered metricated, land area is measured in acres and floor space in square feet, particularly for commercial transactions (rather than government statistics). Similarly, the imperial gallon is used in many countries that are considered metricated at gas/petrol stations, an example being the United Arab Emirates.
The metric system is a decimalised system of measurement based on the metre and the gram. It exists in several variations, with different choices of base units, though these do not affect its day-to-day use. Since the 1960s the International System of Units (SI), explained further below, is the internationally recognized standard metric system. Metric units of mass, length, and electricity are widely used around the world for both everyday and scientific purposes. The main advantage of the metric system is that it has a single base unit for each physical quantity. All other units are powers of ten or multiples of ten of this base unit. Unit conversions are always simple because they will be in the ratio of ten, one hundred, one thousand, etc. All lengths and distances, for example, are measured in meters, or thousandths of a metre (millimeters), or thousands of meters (kilometres), and so on. There is no profusion of different units with different conversion factors as in the Imperial system (e.g. inches, feet, yards, fathoms, rods). Multiples and submultiples are related to the fundamental unit by factors of powers of ten, so that one can convert by simply moving the decimal place: 1.234 metres is 1234 millimetres or 0.001234 kilometres. The use of fractions, such as 2/5 of a meter, is not prohibited, but uncommon.
The International System of Units (abbreviated SI from the French language name Système International d'Unités) is the modern, revised form of the metric system. It is the world's most widely used system of units, both in everyday commerce and in science. The SI was developed in 1960 from the metre-kilogram-second (MKS) system, rather than the centimetre-gram-second (CGS) system, which, in turn, had many variants. At its development the SI also introduced several newly named units that were previously not a part of the metric system.
There are two types of SI units, Base and Derived Units. Base units are the simple measurements for time, length, mass, temperature, amount of substance, electric current, and light intensity. Derived units are made up of base units, for example density is kg/m3.
The SI allows easy multiplication when switching among units having the same base but different prefixes. If you are working with meters and want to convert to centimeters, you only need to multiply the number of meters by 100 because there are 100 centimeters in a meter. Inversely, to switch from centimeters to meters you multiply the number of centimeters by .01.
A ruler or rule is a tool used in, for example, geometry, technical drawing, engineering, and carpentry, to measure distances or to draw straight lines. Strictly speaking, the ruler is the instrument used to rule straight lines and the calibrated instrument used for determining length is called a measure, however common usage calls both instruments rulers and the special name straightedge is used for an unmarked rule. The use of the word measure, in the sense of a measuring instrument, only survives in the phrase tape measure, an instrument that can be used to measure but cannot be used to draw straight lines. As can be seen in the photographs on this page, a two metre carpenter's rule can be folded down to a length of only 20 centimetres, to easily fit in a pocket, and a five metre long tape measure easily retracts to fit within a small housing.
The most common devices for measuring time are the clock or watch. A chronometer is a timekeeping instrument precise enough to be used as a portable time standard. Historically, the invention of chronometers was a major advance in determining longitude and an aid in celestial navigation. The most accurate device for the measurement of time is the atomic clock.
Mass refers to the intrinsic property of all material objects to resist changes in their momentum. Weight, on the other hand, refers to the downward force produced when a mass is in a gravitational field. In free fall, objects lack weight but retain their mass. The Imperial units of mass include the ounce, pound, and ton. The metric units gram and kilogram are units of mass.
A unit for measuring weight or mass is called a weighing scale or, often, simply a scale. A spring scale measures force but not mass, a balance compares masses, but requires a gravitational field to operate. The most accurate instrument for measuring weight or mass is the digital scale, but it also requires a gravitational field, and would not work in free fall.
Difficulties in measurement
Since accurate measurement is essential in many fields, and since all measurements are necessarily approximations, a great deal of effort must be taken to make measurements as accurate as possible. For example, consider the problem of measuring the time it takes for an object to fall a distance of one meter. Using physics, it can be shown that, in the gravitational field of the Earth, it should take any object about .45 seconds to fall one meter. However, the following are just some of the sources of error that arise. First, this computation used for the acceleration of gravity 9.8 meters per second per second. But this measurement is not exact, but only accurate to two significant digits. Also, the Earth's gravitational field varies slightly depending on height above sea level and other factors. Next, the computation of .45 seconds involved extracting a square root, a mathematical operation that required rounding off to some number of significant digits, in this case two significant digits.
So far, we have only considered scientific sources of error. In actual practice, dropping an object from a height of a meter stick and using a stop watch to time its fall, we have other sources of error. First, and most common, is simple carelessness. Then there is the problem of determining the exact time at which the object is released and the exact time it hits the ground. There is also the problem that the measurement of the height and the measurement of the time both involve some error. Finally, there is the problem of air resistance.
Scientific measurements must be carried out with great care to eliminate as much error as possible, and to keep error estimates realistic.
Definitions and theories of measurement
The classical definition of measurement
In the classical definition, which is standard throughout the physical sciences, measurement is the determination or estimation of ratios of quantities. Quantity and measurement are mutually defined: quantitative attributes are those which it is possible to measure, at least in principle. The classical concept of quantity can be traced back to John Wallis and Isaac Newton, and was foreshadowed in Euclid's Elements (Michell, 1993).
The representational theory of measurement
In the representational theory, measurement is defined as "the correlation of numbers with entities that are not numbers" (Nagel, 1932). The strongest form of representational theory is also known as additive conjoint measurement. In this form of representational theory, numbers are assigned on the basis of correspondences or similarities between the structure of number systems and the structure of qualitative systems. A property is quantitative if such structural similarities can be established. In weaker forms of representational theory, such as that implicit within the work of Stanley Smith Stevens, numbers need only be assigned according to a rule.
The concept of measurement is often misunderstood as merely the assignment of a value, but it is possible to assign a value in a way that is not a measurement in terms of the requirements of additive conjoint measurement. One may assign a value to a person's height, but unless it can be established that there is a correlation between measurements of height and empirical relations, it is not a measurement according to additive conjoint measurement theory. Likewise, computing and assigning arbitrary values, like the "book value" of an asset in accounting, is not a measurement because it does not satisfy the necessary criteria.
Types of measurement proposed by Stevens
The definition of measurement was purportedly broadened by Stanely S. Stevens. He defined types of measurements to include nominal, ordinal, interval and ratio. In practice, this scheme is used mainly in the social sciences but even there its use is controversial because it includes definitions that do not meet the more strict requirements of the classical theory and additive conjoint measurement. However, the classifications of interval and ratio level measurement are not controversial.
- Nominal: Discrete data which represent group membership to a category which does not have an underlying numerical value. Examples include ethnicity, color, pattern, soil type, media type, license plate numbers, football jersey numbers, etc. May also be dichotomous such as present/absent, male/female, live/dead
- Ordinal: Includes variables that can be ordered but for which there is no zero point and no exact numerical value. Examples: preference ranks (Thurstone rating scale), Mohs hardness scale, movie ratings, shirt sizes (S,M,L,XL), and college rankings. Also includes the Likert scale used in surveys – strongly agree, agree, undecided, disagree, strongly disagree. Distances between each ordered category are not necessarily the same (a four star movie isn't necessarily just "twice" as good as a two star movie).
- Interval: Describes the distance between two values but a ratio is not relevant. A numerical scale with an arbitrary zero point. Most common examples Celsius and Fahrenheit. Some consider indexes such as IQ to be interval measurements whereas others consider them only counts. Interval-level measurements can be obtained through application of the Rasch model.
- Ratio: This is what is most commonly associated with measurements in the physical sciences. The zero value is not arbitrary and units are uniform. This is the only measurement type where ratio comparisons are meaningful. Examples include weight, speed, volume, etc.
The concept of measurement is often confused with counting, which implies an exact mapping of integers to clearly separate objects.
- Douglas Hubbard "How to Measure Anything: Finding the Value of Intangibles in Business", John Wiley & Sons, 2007
- Stevens, S.S. On the theory of scales and measurement 1946. Science. 103, 677-680.
Measuring the ratios between physical quantities is an important sub-field of physics.
Some important physical quantities include:
- Speed of light
- Planck's constant
- Gravitational constant
- Elementary charge (electric charge of electrons, protons, etc.)
- Fine-structure constant
- Conversion of units
- Dimensional analysis
- Dimensionless number
- History of measurement
- Levels of measurement
- Measurement in quantum mechanics
- Orders of magnitude
- Systems of measurement
- Test method
- Timeline of temperature and pressure measurement technology
- Timeline of time measurement technology
- Units of measurement
- Uncertainty principle
- Uncertainty in measurement
- Virtual instrumentation
- Weights and measures
- Detection limit
- Detection Limits
- Differential linearity
- [http[[://www.euromet.org/docs/pubs/docs/Metrology_in_short_2nd_edition_may_2004.pdf 'Metrology In Short', 2nd Edition]
- Metric conversions
- Measurement Systems.]]